alright so today on repairs101 i�m goingto show you how i made this handy garden tool organizer out of a couple of boards and ahandful of screws. so i decided enough was enough and that iwasn�t going to store my garden tools in a garbage pail anymore. i still had a coupleof salvage boards left and i cut some triangle braces out of scraps. then i measured andmarked to fit the gussets. use your speed square to draw parallel linesquickly. next i found the points on that line to drill my holes.you know, i chose to use the hole saw and table saw for this project because they makeclean and uniform cuts. you can do all the cutting for this projectwith a hand saw and a coping saw or with a
jigsaw.normally i would use a more sophisticated joint like a dado or a mitre joint but forthis i thought a simple butt joint clamped with glue and screws was exactly what we needed.clean up carpenter�s glue before it cures with a clean damp cloth.then i glued in all the gussets and drew them together using the woodscrews.always drill out holes before you drive in screws, otherwise you end up with pieces thatwon�t mate together, split wood and broken screws.you see i put most of the evidence it�s salvaged wood here on the back where no onewill ever see it. alright, thanks for watching and don�t forgetto subscribe!
Komentar
Posting Komentar